Needle Valves

MN6K TYPE

NEEDLE VALVES / BAR STOCK BODY

FEATURES:

  • One body construction for superior corrosion resistance
  • Patern: Straight, Angle & Cross
  • Panel mounting
  • Bonnet

-Back seated blow out proof
-Dust cap protects stem threads from external contamination
-Packing: PTFE, GRAFOIL
-Leak tight seal with low operating torque

  • Spindle:

-Non-rotating tip, Ground and threaded rolled
-Integral Hard & soft seatead
-Orifice: Ø 0.19”

  • Ratings (Metal seated)

-Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
-450°F (232,2°C) limit for Teflon-packed valves
-1000°F (537,8°C) limit for Grafoil-packed valves

  • Materials: 316 SST, 304SST, CS, Astelloy, Monel
  • Material Traceability

-Test

  • Hydrostatic shell @ 1.5 of working pressure.
  • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
  • Lubrication. Molybdenum disulphide (mos2)

Download Technical Specifications

MN6KT TYPE

NEEDLE VALVES / BAR STOCK BODY

FEATURES:

  • One body construction for superior corrosion resistance
  • Patern: Straight, Angle & Cross
  • Panel mounting
  • Bonnet

– Back seated blow out proof
– Dust cap protects stem threads from external contamination
– Packing: PTFE, GRAFOIL
– Leak tight seal with low operating torque

  • Spindle:

– Non-rotating tip, Ground and threaded rolled
– Integral Hard & soft seatead
– Orifice: Ø 0.19”

  • Ratings (Metal seated)

– Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
– 450°F (232,2°C) limit for Teflon-packed valves
– 1000°F (537,8°C) limit for Grafoil-packed valves

  • Materials: 316 SST, 304SST, CS, Astelloy, Monel
  • Material Traceability

– Test

  • Hydrostatic shell @ 1.5 of working pressure.
  • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
  • Lubrication. Molybdenum disulphide (mos2)

Download Technical Specifications

MN10K TYPE

NEEDLE VALVES / BAR STOCK BODY

FEATURES:

  • One body construction for superior corrosion resistance
  • Patern: Straight, Angle & Cross
  • Panel mounting
  • Bonnet

– Back seated blow out proof
– Dust cap protects stem threads from external contamination
– Packing: PTFE, GRAFOIL
-Leak tight seal with low operating torque

  • Spindle:

– Non-rotating tip, Ground and threaded rolled
– Integral Hard & soft seatead
– Orifice: Ø 0.19”

  • Ratings (Metal seated)

– Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
– 450°F (232,2°C) limit for Teflon-packed valves
– 1000°F (537,8°C) limit for Grafoil-packed valves

  • Materials: 316 SST, 304SST, CS, Astelloy, Monel
  • Material Traceability

– Test

  • Hydrostatic shell @ 1.5 of working pressure.
  • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
  • Lubrication. Molybdenum disulphide (mos2)

Download Technical Specifications

Block & Bleed Valve

Sale!

BLOCK AND BLEED GAUGE VALVE: MGV1 TYPE

$64.70 $61.47

GAUGE/BLOCK & BLEED VALVE

FEATURES:

  • One body construction for superior corrosion resistance
  • Bonnet

– Back seated blow out proof
– Dust cap protects stem threads from external contamination
– Bonnet pusher – silver plated for anti galling freezing for increased stem cycle life.
– Packing: PTFE, GRAFOIL
– Leak tight seal with low operating torque

  • Spindle:

– Non-rotating tip
– Ground and threaded rolled
– Integral Hard & soft seatead
– Orifice: Ø 0.19”

  • Ratings (Metal seated)

– Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
– 450°F (232,2°C) limit for Teflon-packed valves
– 1000°F (537,8°C) limit for Grafoil-packed valves

  • Materials: 316 SST, 304SST, CS, Astelloy, Monel
  • Material Traceability

– Test

  • Hydrostatic shell @ 1.5 of working pressure.
  • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
  • Lubrication. Molybdenum disulphide (mos2)

Download Technical Specifications

MGV2 TYPE

GAUGE/BLOCK & BLEED VALVE

FEATURES:

  • One body construction for superior corrosion resistance
  • Bonnet
  • – Back seated blow out proof
    – Dust cap protects stem threads from external contamination
    – Bonnet pusher – silver plated for anti galling freezing for increased stem cycle life.
    – Packing: PTFE, GRAFOIL
    – Leak tight seal with low operating torque

  • Spindle:
  • – Non-rotating tip
    – Ground and threaded rolled
    – Integral Hard & soft seatead
    – Orifice: Ø 0.19”

  • Ratings (Metal seated)

– Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
– 450°F (232,2°C) limit for Teflon-packed valves
– 1000°F (537,8°C) limit for Grafoil-packed valves

  • Materials: 316 SST, 304SST, CS, Astelloy, Monel
  • Material Traceability

– Test

  • Hydrostatic shell @ 1.5 of working pressure.
  • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
  • Lubrication. Molybdenum disulphide (mos2)

Download Technical Specifications

MGV2-LE TYPE

GAUGE BLOCK & BLEED VALVE
END CONNECTIONS:
NPT, BSPP, BSPT, SOCKET WELD

SIZE: 1/4” – 3/4”
BAR STOCK BODY

FEATURES:

  • One body construction for superior corrosion resistance
  • Bonnet

– Back seated blow out proof
– Dust cap protects stem threads from external contamination
– Bonnet pusher
– Silver plated for anti galling freezing for increased stem cycle life.
– Packing: PTFE, GRAFOIL
– Leak tight seal with low operating torque

  • Spindle:

– Non-rotating tip
– Ground and threaded rolled
– Integral Hard & soft seatead
– Orifice: Ø 0.19”

  • Ratings (Metal seated)

– Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
– 450°F (232,2°C) limit for Te#on-packed valves
– 1000°F (537,8°C) limit for Grafoil-packed valves

  • Materials: 316 SST, 304SST, CS, Astelloy, Monel
  • Material Traceability

– Test

  • Hydrostatic shell @ 1.5 of working pressure.
  • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
  • Lubrication. Molybdenum disulphide (mos2)

Download Technical Specifications

MGV-2B TYPE

GAUGE BLOCK & BLEED VALVE

FEATURES:

  • The MALE OUTLET connects direct into the Gauge Pressure Transmitter, providing ONE LESS THREADED CONNECTION.
  • Bonnet
  • – Screw bonnet design
    – Back seated blow out proof
    – Dust cap protects stem threads for external contamination
    – Bonnet pusher – silver plated for anti galling freezing for increased stem cycle life.
    – Packing: PTFE, GRAFOIL
    – Leak tight seal with low operating torque

    • Spindle:

    – Non-rotating tip & soft seated
    – Packing below thread
    – Ground and threaded rolled
    – Orifice: Ø 0.19” (4.7mm)

    • Ratings (Metal seated)

    – Stainless Steel: 6000 PSIG @ 100°F (414 bar @ 38°C)
    – 450°F (232,2°C) limit for Teflon-packed valves
    – 1000°F (537,8°C) limit for Grafoil-packed valves

    • Materials: 316 SST, 304SST, CS, Astelloy, Monel
    • Material Traceability

    – Test

    • Hydrostatic shell @ 1.5 of working pressure.
    • Each valve is tested with N2 @ 1000 Psi for seat & Packing leakage, prior to ship.
    • Lubrication. Molybdenum disulphide (mos2)

    Download Technical Specifications

Manifold Valve

MMV 2VLV

2VLV NPTF, BSPT, BSPP, Flanged

INSTRUMENT MANIFOLD VALVE
MMV TYPE

SIZE: 1/4” – 1/2”

FEATURES:

*Pattern: 2, 3 & 5 Valves & Coplanar
*Bonnet
-Back seated blow out proof
-Dust cap protects stem threads from
-external contamination
*Packing:
-PTFE, GRAFOIL
*Leak tight seal with low operating torque
*Heat code traceability
-Spindle:
-Non-rotating tip
-Ground and threaded rolled
*Integral Hard & soft seated
*Ori!ce:
-Ø 0.19”
*Ratings (Metal seated)
*Stainless Steel:
-6000 PSIG @ 100°F(414 bar @ 38°C)
-450°F (232,2°C) limit for Te#on-packed valves
-1000°F (537,8°C) limit for Grafoil-packed valves
*Materials:
-316SST, 316L, 304, 304L, CS, Astelloy, Monel
*Test
-Hydrostatic shell @ 1.5 of working pressure.
-Each valve is tested with N2 @ 1000 Psi for
seat & Packing leakage, prior to ship.
*Lubrication.
-Molybdenum disulphide (mos2)


Download Technical Specifications

MMV 3VLV

MMV 5VLV

In – Line Check Valve

MCKF TYPE

IN – LINE CHECK VALVE

FEATURES:

  • Pressure Ratings
  • – ( 1000 – 10000) Psi @ 100°F (414 bar @ 38°C)
    – Cracking Pressure: 1 to 25 Psi

  • Materials:

    – 316 SST, 304 SST, Carbon Steel, Monel, Brass Astelloy,

  • Test
  • – Each valve is tested prior to dispatch


Hi pressure Ball Valve For Hydraulic applications

36K TYPE

BARSTOCK OR FORGING

ASTM A 351 – CF8M (DIN 1.4408) or A182 – F316
ASTM A 351 – CF3 (DIN 1.4301) or A182 – F304
ASTM A 216 – WCB (DIN 1.0619) or A105

FEATURES:

  • PIPE THREAD IN ACCORDANCE WITH:

– ANSI B2.1(BASIC STD FOR STEEL PIPE THREADS)
– ANSI B1.20 (NPTF)
– BS21:1973
– DIN259/2999
– ISO228

  • FULL PORT
  • BLOW-OUT PROOF STEM
  • PACKING: GFT , PEEK, Optional: KEL-F, POLYAMAN
  • WORKING PRESSURE: 6000 PSI
  • TEMPERTURE RATING:
  • GFT 450 Deg ° F (232 Deg ° C)
  • PEEK 700 Deg ° F (371 Deg ° C)

– BARSTOCK or FORGING BODY
– SEAT: DELRIN or PEEK

  • MATERIALS: 316 SST, CARBON STEEL, HATELLOY, MONEL,
  • – STADARDS: BS 5750, ISO9001-2000, MSS SP-99

  • TESTING
  • – EACH VALVE IS TESTED WITH N2 AT 1000 PSI FOR SEAT & SEAL LEAKAGE
    – HYDRO TEST; PERFOMED WITH PURE WATER AT 1-1/2 TIMES OF THE WORKING PRESSURE
    – OTHER TEST LIKE H2, SEISMIC ARE AVAILABLE UPON REQUEST